Setup Grandstream WP816 on Wifi

Setup Grandstream WP816 on Wifi

WIFI SETUP 

Once you inserted the battery into the handset and powered on the base.  Power on the phone by holding down the 'red' handset button on the top right.

This will turn on and boot up the phone.  Once you get to the main screen after the Grandstream loading screen,  press the top left button underneath 'Menu'.

By using the round navigation button in the middle go to the icon labeled 'Settings' in the bottom middle row.  It looks like a gear.  Once highlighted press the middle navigation circle button to enter.

On the next screen scroll to 'Wi-Fi Settings' and once highlighted press the navigation circle button again.  If Wi-Fi is 'Disabled' press right on the navigation circle to enable.  Once done, scroll down to 'Wi-Fi Network' and highlight. Then enter that screen by pressing the navigation circle button again.

This will load a screen with all available wifi networks.  Scroll to your Wi-Fi network and highlight with the navigation circle button up and down.  Once you selected your Wi-Fi network, press the top right button under 'Connect'.

You can now type in your wifi password.  If you want to change between numbers and alphanumeric, you can press the '#' on the keypad towards the bottom right.

Once you have connected your phone to Wi-Fi it will say 'Connected' underneath your wifi name on the Grandstream.

With your phone now connected to wifi, please inform us by emailing us at info@spacetek.com.au or ringing us on 0350241222 so we can remotely assist with configuring it.

All our phones and plans are available at:  https://shop.spacetekit.com.au/collections/voip-phones-and-lines

FACTORY RESET (IMPORTANT:  ONLY PERFORM THIS IF ADVISED BY THE SPACETEK IT STAFF.)

Once you inserted the battery into the handset and powered on the base.  Power on the phone by holding down the 'red' handset button on the top right.

This will turn on and boot up the phone.  Once you get to the main screen after the Grandstream loading screen,  press the top left button underneath 'Menu'.

By using the round navigation button in the middle go to the icon labeled 'Settings' in the bottom middle row.  It looks like a gear.  Once highlighted press the middle navigation circle button to enter.

On the next screen scroll to 'Advanced Settings' and once highlighted press the navigation circle button again.   Again, scroll down to the 'Factory Reset' option.   Press the middle navigation button to allow for the reset prompt.  You will be asked to 'Start factory reset now?'.  Select the 'Yes' option to left.  The phone will now factory reset and restart.  Once it restarts, rejoin the Wifi network settings as per above.

    • Related Articles

    • How to setup my Expansion Wifi Pack?

      Introduction With our standard expansion pack you will receive the following: 1 x Wifi Modem 2 x Point to Point, including 2x Power (POE) Injectors 2 x 10M Network Cable 2 x 0.5m Network Cable See below for standard equipment (*pictures may vary with ...
    • I want information on Networking and Wifi

      Our SpaceTek IT WIFI Solutions As Starlink brings high-speed internet to more homes in remote and rural areas, ensuring optimal WiFi coverage throughout your property is essential. Whether you want to extend WiFi through a large house, cover an ...
    • How do I setup my Ruijie M32 / M16 Mesh Router?

      First ensure your Ruijie Mesh router is factory reset. Do this by putting a small pin into the 'Reset' hole in the back just below the power. Hold the pin down for 10 seconds, until you start seeing the light on top flashing. After a couple of ...
    • I want more information on Starlink Compatible Phone Plans?

      Starlink VOIP phones and lines offer a reliable and cost-effective solution for your communication needs, especially for home or businesses seeking to integrate voice over IP (VOIP) technology. This guide will walk you through the available options ...
    • I need assistance with my Starlink! / Can you help me with Starlink?

      Unfortunately we aren't affiliated with Starlink. We are an Australian-based company that manufacturer Starlink accessories and mounts. We can assist with support of our products, or assist you with anything related to your Starlink service, such as ...